Bruno's Of Chilliwack - Produits
Inov8 Waste Oil Unit Furnaces
Envoyer une demande de renseignements par e-mail à Bruno's Of Chilliwack
*Model F-125 - This 125,000 input unit heater is a perfect size for the small garage that has limited space and heating needs. This unit heater uses the B200 burner in an aluminized heat exchanger consuming .84 gallons per hour to heat about 2,500 square feet.
**Model F-240 - The most popular selling size is the model F240 furnace, which has an input of 240,000 BTU's and will heat a typical 5,000 square foot facility consuming 1.68 gallons of waste oil per hour. This furnace mounted on the bench tank is the most popular selling combination because of its efficiency, ease of installation and maintenance.
***Model F-450 - For businesses that have extraordinary heat needs and sufficient quantities of waste oil the F450 furnace is their answer. This unique design features a fire down configuration of the burner and all heat exchanger surfaces are vertical to prevent the build-up of ash. This extends the time between cleaning. The heat exchanger tubes are separated into heat zones allowing for independent expansion preventing stress fatigue on the steel. Like our other furnaces, it is fully cleanable and very energy efficient. In addition this furnace comes with a squirrel cage blower to allow ducting to distribute the hot air. The F450 will heat up to 10,000 square feet while burning 3.78 gallons per hour of waste oil.
****Bench Tank -
WASTE OIL UNIT FURNACES WITH BENCH TANK:
INOV8 has a bench tank specifically designed to accommodate waste oil and is unique to the industry. It is actually a tank within a tank. Within the 300 gallon tank is a smaller container where the oil is first placed. This allows for time for water and sludge to settle to the bottom while the best oil spills over the top into the main part of the tank. From there the oil is drawn for the burner fuel. Steel supports are secured to the back of the tank and hold the smaller furnaces eight feet above the tank - the recommended height for shops in the United States. Included with the bench tank are the necessary oil lines and a tank gauge. The tanks are also painted with an industrial powder coat paint to complement the furnace color. Installations using this bench tank are easy and convenient. Customers need only supply the chimney, electrical and a compressed air connection. INOV8 also has available double and single wall tanks from other suppliers that will accommodate any size and configuration requirement.
Waste Oil Fueled Furnaces (Oil Fired Central Furnaces) INOV8 International furnaces come in three sizes, rated in BTUs of output: 120,000, 240,000 and 450,000. The INOV8 furnaces are designed to accommodate the easy removal of ash, are constructed of high temperature aluminized and stainless steels, have heavy duty motors to prevent overload conditions, and are finished with an industrial powder coat paint for good appearance and durability. The entire system is engineered to ease service and maintenance and the instruction manual is written for the novice so that most users can provide their own maintenance. The burners come with an optional "perpetual warranty" that provides an annual swap of the module (that contains many of the components that are subject to failure). Furnaces include as standard many of the components needed for a complete installation: a barometric damper, a floating pick-up assembly, a filter and check value, hanging brackets, and a 120-volt wall thermostat. Due to different size requirements for heating your area and requiring advance knowledge of the fuels you wish to use, please contact us for specifications & pricing.
